The Ghost Immobiliser
Immobilisers can be a powerful weapon in the fight against car theft. They stop the vehicle from starting if the isn't equipped with an ignition key fob. They also work well to stop hotwiring or other traditional types of vehicle theft. Newer methods such as key cloning or relay theft are becoming increasingly common.
The Ghost Immobiliser has been designed to counter these trends and make your vehicle undetectable. It doesn't use LED indications radio signals, key fobs, and is quiet and discreet.
Easy to install
The Ghost Immobiliser is a groundbreaking device, connects with the CAN data network of your vehicle in order to prevent key cloning or theft. It is a TASSA-approved product, and insurance companies endorse it. It is almost unnoticeable by thieves and operates in silence. It uses buttons on your steering wheel as well as the central console to create unique pin-code codes that you must enter before you can start your vehicle. You can create up to 20 different sequences to improve security. The system is simple to set up and does not require any additional wiring or hardware.
It is recommended that you use an authorised immobiliser CAN installer who is specialized in your specific vehicle type to get the best results. Ideally, they will have a workshop near you where you can visit to complete your installation. They'll also have a variety tools and materials to assist you in the process of installing. They will have basic hand tools, a multimeter and insulation tape as well as heat shrink tubing to safeguard the connections. A user manual will give you instructions on how to wire your vehicle.
Connect the battery prior to beginning the installation to avoid short circuits or airbag deployment. Double-checking the CAN L and CAN H wires is essential because a mistake in identification could result in a faulty integration of the system. It is also a good idea to mark the wires with tiny pieces of tape or label them with labels. Make use of a multimeter to ensure that the power source is providing the same 12V.
Advanced thieves can use various methods to evade Ghost Immobilisers, such as blocking or spoofing. These techniques work by amplifying signals sent from the key fob to the electronic controller unit. With advanced anti-jamming technologies and vigilant monitoring your vehicle will be protected from these sophisticated attacks.
Security Improved
Ghost immobilisers offer an additional layer of security to protect your vehicle from theft. It works with a PIN code security system that can be operated by using buttons that are already on your dashboard or steering wheel which makes it difficult for thieves to gain access the device and take your vehicle. The device is also designed to be hidden inside your vehicle, without any other lights or signals that could signal a potential criminal to its presence. It connects directly to the ECU of your vehicle via the data bus. This means it is not susceptible to hacking or relay attacks.
It's a fantastic investment for those who have prestige automobiles, which are at higher chance of being stolen due to their price and popularity. Its security features are enhanced to protect against key copying, ECU swapping, and other threats to your car's security. Ghost immobilisers can be paired with apps, so you can arm and disarm quickly. They can also be equipped with an option for service/valet that allows you to temporarily deactivate them while your vehicle is being repaired or serviced.
A ghost immobiliser has another wonderful benefit that is that it doesn't need any wire cutting. This is a great option, particularly if you own a brand newer vehicle which does not come with built-in immobiliser technology. Certain systems also work with GPS tracking devices, adding an extra layer of security to your vehicle. A GPS tracker can also help to reduce your insurance premiums. If you decide to purchase an immobiliser for ghosts ensure that it is TASSA certified and a professional installer will install it for you.
Compatible with all major brands and models
The Ghost Immobiliser was designed to work with all major models and makes, protecting your precious possessions from theft. It utilizes buttons on your steering wheel, the centre console or door panels to generate a unique pin code, that must be entered before you are able to drive your vehicle. The system is tamper-proof unbreakable and comes with three-year guarantee. It is also fully certified by insurance providers This means that it could help reduce your premiums.
In contrast to standard immobilisers that use your key fob to control the ignition of your car however, the Ghost system works by connecting directly with the engine controller unit via the CAN data bus. It is virtually impossible to remove, disable or hack. The Ghost system can also be paired with an iPhone app to monitor remotely and management.
You can choose an PIN code that is easy to remember, yet mathematically impossible for thieves to guess. The PIN can be personalized and modified at any time, so you can keep your car secure even if it's parked on the streets or in a public parking lot. You can also select the valet or service mode if you need someone else to drive your vehicle temporarily for instance, when it's in the garage. This feature will also help keep your vehicle from being stolen by a dishonest mechanic. To ensure your security, you can opt for a Ghost call alert which will notify you if your vehicle is moving or it's moved.
Convenience
The ghost immobiliser shields your vehicle from common theft methods such as key cloning or relay attacks. It works by connecting to the car's CAN data network and preventing communication with the engine ECU. This makes it impossible for thieves to copy or hack your vehicle, making the installation of this system a good idea for any driver.
After installation, you'll be required to enter a PIN sequence up to 20 digits using the buttons on your dashboard or steering wheel to begin the engine. The system is completely hidden and thus unnoticeable to thieves. It doesn't emit radio frequency signals. It can be set up using an PIN code that can be changed by the user, adding to its security. The system is designed to avoid cutting of circuits, making it virtually impossible to alter.
If you do get lost in your PIN, there are systems that let you communicate with the immobiliser via an app on your smartphone to disarm it immediately. Some come with an option for service or valet that allows you to start your car temporarily, such as when you have to drop it off for maintenance or valet parking.
The Ghost Immobiliser is also inaccessible to thieves, since it doesn't transmit radio signals. This is a significant advantage over other aftermarket security systems. Additionally, it is simple to use and does not require any wiring that is complicated. You can also use it together with a dash cam for added safety. Dash cams include the Thinkware F70, which features clear & crisp 1080p HD dashcam footage, Format Free Technology and parking mode. The system is able to be hardwired to guarantee maximum performance and longevity.
Installation
It is crucial to select the most effective immobiliser ghost to safeguard your vehicle from thieves. This device can in preventing theft of your car by blocking the communication between your engine controller unit (ECU) and key fobs. This device prevents thieves from stealing the signal to start your vehicle. It also can detect any time it has been tampered with and notify the owner of the vehicle.
The device is easy to install and integrates with the vehicle's existing systems. It does not require any modification to the wiring in your vehicle and can be tucked away in a secluded area, like under the dashboard. To ensure that the device is properly installed, follow the instructions in the user's manual. It is also important to test the system after installing it. This will ensure that the ghost of the immobiliser works as it should.
You can purchase an Autowatch Ghost 2 Immobiliser from a certified installer and have it installed on your vehicle. The installer will connect the Ghost to the CAN Bus network in your vehicle, which makes it difficult for thieves to steal or disable the system. The installation process generally takes about 2 hours.
It is recommended that you consult the wiring diagram of your vehicle prior to the installation process. This will enable you to find the CAN High and CAN Low wires needed to connect your Ghost to the engine of your vehicle. Double-check all connections to ensure they are secure and insulated.
Once the installation is complete, you can use the Ghost Immobiliser during normal operation. ghost immobiliser and tracker will turn off your vehicle's ignition if it isn't started with the correct PIN code which you can set yourself. The immobiliser ghost cost can also be set to Service/Valet mode for times when you need to hand over your vehicle for maintenance or valet parking.