Protect Your Car From Key Long and Relay Theft With a Ghost 2 Immobiliser
The revolutionary Ghost immobiliser will safeguard your car from key-long theft and relay theft. Your car won't even start in the event that someone doesn't have your PIN code.
It also comes with Transport Mode that allows you to disable the device temporarily which is ideal for transport and servicing. It then reactivates by entering a pin code again.
There are no Key Fobs or Led Indicators
The Ghost 2 immobiliser offers a effective defense against modern theft techniques. Its unrecognizable installation and engine stop-blocking help to reduce the risk of your vehicle being stolen, which could provide peace of mind and potentially even save you money on insurance premiums.
It cannot be detected by scanners and is not hacked using common methods like key cloning and signal jamming. The device utilizes buttons in your vehicle, like those found on the steering wheel or door panels, to generate a unique PIN code that can be changed. This sequence can be as long as 20 presses. If the sequence is entered correctly or when a beacon or mobile app is utilized, only the owner can start the engine, thereby providing an extra layer of protection against thieves.
You can also enable an easy service mode when you need to perform tasks such as valet parking or servicing, which requires you to temporarily disable your system. The mobile app makes it simple to do this, and ensures that your vehicle is safe during the time it is being repaired. Once the job is completed, it is easy to switch back to secure mode. This ensures that your car is secure at all time.
In contrast to other aftermarket immobilisers that use a fob The Ghost 2 can be operated directly from the vehicle's existing buttons, making it simpler to use than traditional systems. The application can also be used as a backup key in the event of an emergency. This lets you drive while your security is shut off, without needing to enter a pin code.
No Radio Frequency Signals
Contrary to traditional security systems which have their own separate remote, the Ghost 2 immobiliser doesn't require any additional key fobs or keys and can be used with the buttons on your steering wheel or centre console. The device is unnoticeable by thieves who use RF scanning technology or code grabbing, so your car will not start if they manage to steal your key.
The device locks the engine by using an unique sequence of buttons. The personalised PIN code can be entered on the app or using the buttons on the steering wheel and centre console. You can also lock the gearbox to ensure that your vehicle isn't able to be driven unless you have your key or pin code. The device can be set in Transport mode, which allows you to drive the car without entering your pin code. This will provide extra protection for your vehicle when it is parked in a valet or service.
The Ghost 2 immobiliser was designed to be as subtle as possible as a theft deterrent. This makes it a great option for those who have invested a lot on customising their vehicles or own expensive or rare vehicles. Many people have testified that this is a great option to guard their cars from theft and even share stories of attempted thefts that have been thwarted by the device. The Ghost 2 also offers a large amount of flexibility, with customers reporting that it works with their regular keys for their cars as well as with the emergency button on their vehicle, giving them peace of mind while they are away from their vehicle.
No Radio Frequency Scanners
Secure your vehicle from hacking, key cloning and key theft with the Ghost immobiliser. The system uses the buttons on your dashboard and steering wheel to create a unique sequence of buttons that only you know. Your car will not start without this sequence. The combination of a unique disarming sequence and the lack of radio frequency signals makes the device extremely difficult to break or override.
The Ghost CAN Immobiliser is a safer alternative to devices approved by Thatcham that rely on radio frequency scanning. It works completely silently and without external signals and does not rely on any external signals. It is a safer alternative and is insured if it is installed by an installer who is TASSA-approved (we are one of them!) ).
Because of the nature of how the Ghost immobiliser works with your vehicle, it is advised to have a professional installer carry out the installation. This ensures that it is seamlessly integrated into your vehicle systems, resulting in maximum performance and a considerably reduced chance of failure.
Furthermore, professional installation usually comes with warranties and service which further enhances the value of your investment. This is a major deterrent for potential thieves who are less likely to try and bypass the device because of its extensive security features.
The Ghost is not only an effective deterrent to thieves, but it's also designed to be simple to use. It can be set to automatically re-arm a certain period of time after parking your car. This means that you don't have to keep track of your PIN every time. It also provides the flexibility of Service/Valet Mode when you have to hand your vehicle to a service or valet parking, which can be enabled or disabled based on your preference using an easy sequence of indication.
No Wire Cutting
The Ghost 2 does not require cutting of any car wires during installation, ensuring non-invasive integration with the original systems of your vehicle. It connects to the CAN data network of your vehicle and is programmable with a unique PIN. This will prevent anyone else from starting the engine if they do not have a personalised sequence of PINs, or app authorisation.
It's also silent, as it does not emit radio signals like other immobilisers. It's weatherproof, sealed and so small it can be concealed anywhere inside the vehicle, making it nearly impossible to find.
The Ghost II also has the possibility of being put into 'transport mode, which allows it to be used for short durations of time without the need for an individual PIN. ghost immobiliser problems is ideal in situations such as lending the car to a family member or friend or in emergency situations, allowing you to start your vehicle and drive away quickly and safely.
When installing the Ghost II, it's important to be in a well-lit area and wear safety equipment when working with electrical and tool components. A basic set of hand tools will enable you to create precise connections, while a multimeter can help check electrical values and make sure your wiring is safe. Cable tie and insulation tape can be used to cover any wires that are cut or exposed or to join them during installation.
It is essential to disconnect the vehicle's battery before beginning any wiring work. This will prevent any airbag deployments as well as electrical shocks when the Ghost II is connected to the vehicle's system when the battery is disconnected.
Easy to Install
The Ghost immobiliser, an exclusive device of the next generation, works by directly connecting to your vehicle's CAN Data Network. It uses a personalised pin code to block it from beginning. This makes it much harder to hack than conventional key fobs and alarm systems and offers greater protection from key cloning hacking, as well as relay attacks.
The unit can be hidden inside your vehicle, and it uses the existing buttons on your dashboard and steering wheel to generate the sequence you are aware of. This prevents thieves from being able to use a cloned key to start the car. It additionally, it prevents them from using an instrument for diagnosing that thrives on hacking into the OBD.
Installation is simple and does not require cutting wires. The unit is connected to the vehicle's CAN bus using a continuous 12V supply as well as a grounding connection. Basic hand tools are sufficient to install the unit, and a multimeter will assist in locating the right wires. Insulation tape or heat shrink tubing is recommended to protect the connections, and cable ties can be used to keep the wiring tidy and tidy.
After installation, the unit is put into a learning mode which will record your individual sequence of buttons or sequences to generate your unique pin code. This information is then stored in the CAN data network, making it nearly impossible for anyone else to replicate the sequence and start your car.
Transport Mode is a function that can be used in the event of an emergency when you forget your PIN code, decide to sell your vehicle or the button is not working. This will turn off the Ghost system completely, but will reactivate automatically when you exceed 31 mph for more than 15 minutes or when you enter your PIN Code. This is ideal for those who regularly rent out their vehicles via services such as Turo or ZipCar.